In order to connect your Jam speaker to your iPhone, you will need to first ensure that your speaker is fully charged. Once it is, you will need to locate the 3.5mm audio input on the bottom of the speaker. Next, you will need to locate the 3.5mm audio output on your iPhone. Once you have found both of these, you will need to use a 3.5mm audio cable to connect the two. Once the two are connected, you should be able to play audio through your Jam speaker.
Quick Tips: Connect Jam Speaker To Iphone
There are a few different ways that you can connect your JAM speaker to your iPhone, and the method that you use will depend on the model of iPhone that you have. If you have an iPhone 7 or later, you can use the Lightning to 3.5 mm headphone jack adapter that came with your phone to connect your JAM speaker. If you have an iPhone 6s or earlier, you can use the 3.5 mm headphone jack to connect your JAM speaker.
To connect your JAM speaker to your iPhone using the Lightning to 3.5 mm headphone jack adapter, first make sure that your JAM speaker is powered on. Then, insert the Lightning end of the adapter into the Lightning port on your iPhone. Next, take the 3.5 mm end of the adapter and insert it into the 3.5 mm input on your JAM speaker. Once the adapter is plugged in, you should see a blue light on the speaker, indicating that it is connected.
To connect your JAM speaker to your iPhone using the 3.5 mm headphone jack, first make sure that your JAM speaker is powered on. Then, insert the 3.5 mm end of the cable into the 3.5 mm input on your JAM speaker. Next, take the other end of the cable and insert it into the 3.5 mm headphone jack on your iPhone. Once the cable is plugged in, you should see a blue light on the speaker, indicating that it is connected.
Frequently Asked Questions
How to Pair HMDX Jam Speaker?
The HMDX Jam speaker is a great Bluetooth speaker that can be used to pair with any Bluetooth-enabled device. In order to pair the speaker with your device, simply follow these steps:
- Make sure that your HMDX Jam speaker is turned on and in Bluetooth discovery mode.
- Open the Bluetooth settings on your device and look for the HMDX Jam speaker in the list of available devices.
- Once you have found the HMDX Jam speaker, select it and wait for the two devices to be paired.
- Once the HMDX Jam speaker is paired with your device, you should be able to play music through the speaker.
How Do You Turn on a Jam Speaker?
There are a few different ways that you can turn on a JAM speaker. The first way is to use the power button on the speaker. The second way is to use the remote control that comes with the speaker. The third way is to use the JAM app.
Using the power button on the speaker, you will need to press and hold the button for a few seconds. The speaker will then power on and you will be able to use it.
when you are using the remote control, you will need to press the power button on the remote. The speaker will then power on and you will be able to use it.
Using the JAM app, you will need to open the app and press the power button. The speaker will then power on and you will be able to use it.
How to Reset Jam Plus 2 Speaker?
If your Jam Plus 2 speaker is not working properly, you may need to reset it. To do this, follow these steps:
- Turn off the speaker.
- Remove the battery.
- Press and hold the power button for 10 seconds.
- Replace the battery.
- Turn on the speaker.
Conclusion
Are you want to connect your Jam speaker to your iPhone? You will need to use the Lightning to 3.5mm adapter. Once you have this adapter, you will be able to plug the Jam speaker into your iPhone and play your music. The Lightning to 3.5mm adapter is the only way to connect your Jam speaker to your iPhone. There is no other way to do it.
